Close
“Passive fire protection (PFP) coatings make structures more resistant to fire by insulating structural steel from high temperatures and as a result, buy time for the evacuation before structural collapse.
The Graco XM™ PFP Plural-Component Sprayer offers data reporting technology, so you can confirm that epoxy intumescent coatings are sprayed on-ratio, at requirements set by the manufacturer. The XM PFP is easy to use, maintains consistent temperature control and offers precise ratio control.”
| Model | XM PFP |
|---|---|
| Mix Ratio Range | 1:1-10:1 (in 0.01 increments) |
| Ratio Tolerance Range (before alarm) | +/- 5% |
| Maximum Flow Rate (measured with oil) | 13.6 liters per minute |
| Fluid Viscosity Range | 31.75 mm ID |
| Fluid Viscosity Range | Handles mastic materials which are loaded into heated tankswith ram-fed priming piston pumps |
| Fluid Inlets | Pail (Feed Pumps) |
| Maximum Fluid Working Pressure for A and B Materials | 41 MPa, 414 bar |
| Maximum Fluid Working Pressure for Heating | 0.7 MPa, 7 bar |
| Maximum Fluid Temperature | 70°C |
| Minimum Air Consumption | 2.8 meter³/min |
| Maximum Air Consumption | 7.1 meter³/min |
| Voltage (can be set with jumpers) | Option 1: 220-240V, 3 phase DELTA (3 wire plus ground) Option 2: 380-400V, 3 phase WYE (4 wire including neutral plus ground) |
| Wattage | 18,400 watts (23,400 with optional flush water heater) |
| Amps | 240V, 3-phase models: 65 Amps per phase full load: 380V, 3-phase models: 38 Amps per phase full load |
| Machine | CE, ETL |
| Pressure Tanks | ASME, CE |
