Compact, powerful and easy to use – the durable floor cutter was designed to quickly and reliably complete demanding tasks where a cutting depth of up to 415 mm is required
The walk-behind floor saw works with the scissor principle and is designed for demanding building conditions, where its power and compact design are impressive. MULTICUT 400 P with 2-cylinder Kohler petrol engine develops 26,1 kW / 35 hp and MULTICUT 400 D with 3-cylinder Perkins diesel engine develops 18.4 kW / 25 hp ,both meets the Euro Stage V emissions standard. The high-torque engine drives saw blades with a diameter of up to 1,000 mm (standard = 800 mm). This enables the floor saw to achieve cutting depths of up to 415 mm (315 mm).
The floor saw, designed for demanding continuous operation in road construction, renovation work and repair work, has a hydrostatic drive that is both powerful and sensitively adjustable. The durable floor cutter has proven itself when making separating cuts in asphalt and concrete, as well as for powerful floor cutting in fresh concrete. The low center of gravity ensures an exact saw cut every time.
The saw blade is lowered and raised electro-hydraulically and has a cutting depth indicator, preventing damage to the saw blade. The height-adjustable handles allow ergonomic operation of the floor saw. For overcuts, the saw blade hood can be folded up at the front as standard. Also extremely useful, the saw can very quickly be converted from left to right cutting. Typical of LISSMAC floor saws is the easy access for common maintenance tasks (air filter, battery, oil and fuel filter) thanks to its optimally placed drive unit.
The floor saw has exceptional endurance and reliability despite its small size. The compact, manoeuvrable and at the same time extremely powerful floor saw impresses users with its power and user-friendly ergonomics in strenuous everyday construction site work.
Compact floor saw with scissor Technology
Drive via hydrostat guarantees smooth and controlled operation of the machine
Optimum power transfer with high performance V-belts
Warp-resistant sheet frame construction
The compact design and balanced chassis permits easy manoeuvring around the construction site
The low centre of gravity ensures a precise cut
Easy straight cuts due to the adjustable rear axle
Electro- hydraulic lowering and raising of the saw blade with a threaded spindle with cutting depth indicator prevents damage to the saw blade
Height adjustable handles allow for ergonomic Operation
Blade guard front can be raised for intersections
Rapid changeover from left to right-hand cutting
Easy access for the usual service and maintenances tasks (air filter, battery, oil filter, fuel filter) due to the perfect motor Position
Parking brake and neutral (free-wheeling) comes as a standard feature
Model | MULTICUT 400 D | MULTICUT 400 P |
---|---|---|
Cutting depth | 315 mm / 415 mm | 315 mm / 415 mm |
Cutting depth setting | electrohydraulic with depth gauge | electrohydraulic with depth gauge |
Saw blade Ø max | 800 mm / 1000 mm | 800 mm / 1000 mm |
Arbor size | 25.4 mm | 25.4 mm |
Drive motor | Perkins Diesel 3-cyl. | Kohler petrol 2-cyl. |
Output power max. | 18.4 kW / 25 hp | 26.1 kW / 35 hp |
Rated speed / load speed fresh concrete | 3040 1/min. / 2800 1/min. | 3000 1/min. / 2760 1/min. |
Rated speed / load speed Ø 600-800 | 1621 1/min. / 1493 1/min. | 1600 1/min. / 1472 1/min. |
Rated speed / load speed Ø 800-1000 | 1351 1/min. / 1244 1/min. | 1333 1/min. / 1227 1/min. |
Left and right cut | yes | yes |
Dimensions (L/W/H) | 1300 / 840 / 1690 mm | 1300 / 850 / 1200 mm |
Weight | 458 kg | 416 kg |