Close
Precise ratio assurance in a fully configurable system
Engineered to handle the toughest protective coatings, the Graco XM Plural-Component Sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.
At the heart of the ratio control is Graco’s advanced dosing technology. The major component is constantly flowing while the minor component is injected at higher pressures. Advanced sensing technology allows pumps to compensate for pressure fluctuations, resulting in accurate, on-ratio mixing for better yield and less waste.
Ideally suited for marine, bridge, rail and wind energy applications, the Graco XM is fully configurable for your specific coatings job. Start with a base unit. Then select the accessories you need. You get exactly what you need. No more. No less.
| Model | XM Plural-Component Sprayers |
|---|---|
| Mixed Ratio Range | 1:1-10:1 (in 0.1 increments) |
| Ratio Tolerance Range (before alarm) | +/- 5% |
| Minimum Flow Rate | 10.95 l/min |
| Maximum Flow Rate | 11.4 l/min |
| Fluid Viscosity Range | 200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding) |
| 50:1 Maximum Fluid Working Pressure of mixed material | 35.8 MPa/358 bar |
| 70:1 Maximum Fluid Working Pressure of mixed material | 43.5 MPa/435 bar |
| Maximum Fluid Temperature | 71° C |
| Air Supply Pressure Range | 0.35-1.0 MPa/3.5-10.3 bar |
| 50:1 Maximum pump air set pressure | 0.70 MPa/7.0 bar |
| 70:1 Maximum pump air set pressure | 0.62 MPa/6.2 bar |
| Maximum pump inlet fluid feed pressure | 1.7 MPa/17 bar |
| Maximum Air Consumption | 1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min |
| Ambient Operating Temperature Range | 0 to 54° C |
| Environmental Conditions Rating | Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2) |
